Download Catalog
Dry Bath Incubator LBN-DI151 is a microprocessor controlled device with highly precise temperature control up to 150°C and a timer. Accommodates a single aluminum alloy block of 96 × 76 mm dimension, designed to facilitate easy placement and extraction of tubes. Equipped with a digital wheel for accurate time and temperature adjustment along with the parameters being displayed on LED screen.
| No of Blocks | 1 |
|---|---|
| Heating Temperature Range | RT +5°C to 150°C |
| Ambient Temperature | 5° - 40°C |
| Relative Humidity | 0.8 |
| Temperature Uniformity <60°C | 0.2 |
| Temperature Uniformity >60°C | 0.2 |
| Temperature Stability Within The Blocks <60°C | ±0.5° |
| Temperature Stability Within The Blocks >60°C | ±1 |
| Plate Dimension | 96 × 76 mm |
| Timer | 1 min – 99Hr 59min |
| Display | LED |
| Display Resolution | 0.1 |
| Plate Material | Aluminum alloy |
| Power Input | 165 W |
| Heat Output | 165 W |
| Voltage | 200 – 240 / 115 V |
| Frequency | 50/60 Hz |
| Dimension (W × H × D) | 152 × 86 × 190 mm |
| Weight | 1.5 Kg |
Digital controls and display of time and temperature
Use of timer allows the user to accurately monitor heating time
Wide range of interchangeable aluminum alloy heat blocks
Temperature deviation adjustment
3D digital wheel adjustment of temperature and time
High temperature precision up to ±5°C
Easy set up and operation
Over heat protection
Auto calibration with PT1000 temperature sensor
Dry Bath Incubator is used for qualitative and quantitative procedures in clinical laboratories, research institutes, biological labs for culture activation, enzyme reaction, coagulation studies, polymerase chain reactions etc.
