Sample Concentrator LBN-SC162 is a fast and microprocessor-controlled device that works by blowing nitrogen on the surface of the sample. The device has a temperature range of up to 160°C and a nitrogen flow rate of 15L/min under 0.1Mpa pressure. The fully adjustable gas reservoir allows for precise height control, with a maximum vertical travel distance of 200mm for double block quantity.
Temperature Setting Range | 0 to 160℃ |
Temperature Control Range | RT 5℃ to 160℃ |
Block Quantity | 2 |
Timing Range | 1min – 99 min 59 seconds |
Temperature Accuracy | ≤±1℃ (at 120℃) |
Temperature Uniformity | ≤±0.5℃ |
Heating Time | ≤ 15min (from 25℃ to 160℃) |
Maximum Vertical Travel | 200 mm |
Nitrogen Flow Rate | 15 L/min |
Nitrogen Pressure | 0.02 Mpa (gas needle ≤16pcs) 0.05 Mpa (gas needle ≤16pcs) |
Voltage | AC110V or 220V, 50/60 Hz |
Power | 500 W |
Dimension (W × D × H) | 260 × 220 × 450 mm |
Weight | 7.5 Kg |
Adjustable position of gas needle in air chamber plate for different types of tubes
Adjustable height of air chamber plate
Independently controlled gas needle
Easy operation; safe and reliable to use
High precision and wide range of temperature control
Blowing large no of samples at one time
Airflow amount can be adjusted
Automatic fault detection and alarm function
Built-in over temperature protection device
Temperature deviation calibration function
Sample Concentrators are widely used in residue analysis, commodity inspection, food, environment, pharmacy and biological products and other industries.
Download Catalog for Sample Concentrator LBN-SC162
DownloadTemperature Setting Range : 0 to 160℃
Temperature Control Range : RT 5℃ to 160℃
Block Quantity : 1
Timing Range : 1min – 99 min 59 seconds