Automatic Distillation Tester LBN-AD141 analyses the boiling range of petroleum products up to 400°C in a highly accurate manner. The sample is evaporated and condensed between 0° to 60°C using a distillation heater powered by 1000W. An easy-to-use PC communication software for Windows expands user capabilities for data analysis and unit control. To reduce operator downtime, the heater compartment is rapidly cooled at the end of a distillation run. It has an automatic fire extinguishing function with a flame detector, and the flask is made of quartz for durability.
Temperature Range | 0 - 400℃ |
Temperature Accuracy | ±0.1℃ |
Volume | 0 – 100 ml |
Accuracy of Volume | <0.1 ml |
Fractions Speed Range | 4 – 5 ml/min |
Temperature Range of Condenser Pipe | 0 to 60℃ |
Temperature Range of Acceptor | 0 to 60℃ |
Maximum Heating Power | 1000 W |
Supply Voltage | AC220V±10% 50HZ |
Automatic temperature and volume calibration
Receiver chamber heating system up to 60°C
Integrated automatic fire extinguishing system with manual operation override
Quartz crystal flask for durability
Wire heating protection device, can extend service life
Guide shovel ensures no gap between measuring cylinder and sealing cover to ensure accurate recovery rate
Internal tracking control system, avoids corrosion of the surface
Adopts low voltage and high current distillation heater
Automatic comparison of repeatability and reproducibility of multiple test results
Over temperature protection
Automatic Distillation Testers are widely used to perform optimal distillation analyses on gasolines, fuels, oils, solvents, aromatics, naphtha, kerosene, hydrocarbons, and other volatile products in order to ensure compliance with stringent quality control standards.
Download Catalog for Automatic Distillation Tester LBN-AD141
DownloadLabnic Closed Cup Flash Point Tester accurately determines the flash point of liquids in a closed environment. Their advanced heating and cooling system ensure precise temperature control. They are equipped with user-friendly interface for easy operation and quick results. Their compact design makes them suitable for laboratories and refineries. Our Closed Cup Flash Point Tester is ideal for safety and quality control in petroleum and chemical industries.
Flash point :
Range | Ambient to 300 ℃. |
Repeatability | ≤ 2 ℃ |
Reproducibility | ≤ 4 ℃ |
Accuracy | 0.1 ℃ |
Ignition mode :
Source | Gas |
Type | Electric |
Gas flame diameter | 3.2 mm to 4.8 mm |
Heating rate : For Procedure A: 5 to 6 ℃/min For Procedure B: 1 to 1.6 ℃/min Automatic control and manually adjustable
Stirring rate : For Procedure A: 90 to 120 rpm, For Procedure B: 250 ± 10 rpm Automatic control and manually adjustable
Labnic Vapor Pressure Tester is an automatic device designed for accurate and reliable performance. They measure the vapor pressure of volatile petroleum products with high precision. Their advanced heating technology enhances safety during testing. They are equipped with user-friendly interface that ensures effortless operation and consistent results. Our Vapor Pressure Tester is well-suited for fuel analysis, chemical testing, and environmental monitoring.
Pressure range : 0 to 200 kPa or 0 to 29 psi
Ambient temperature : 5 to 35 ℃
Temperature control accuracy : ± 0.1 ℃
Relative humidity : ≤ 85%