PP Spray Fume Hood LBN-PF162 Catalog

PP Spray Fume Hood LBN-PF162 is a custom-made fume hood with an exhaust volume of 700m3/h designed to reduce perchloric acid residues. The inside of the deflector has a spray system that can neutralise the acid gas before discharging it into the exhaust gas. For ease of use, the advanced model includes a circulating pump, waterproof socket, water-gas remote control, PP sink, and an LED display.

Material	Porcelain white PP, 8mm thickness
Airflow Velocity	0.3 ~ 0.8 m/s
Exhaust Volume	700 m3 /h
Waterproof Socket	Two, total load ≤500 W
Blower	Built-in PP centrifugal blower
Front Window	Resistant to acid and alkali, manual, 5mm toughened glass
Operators	1 - 2
Noise	≤ 68 dB (A)
Illumination	≥ 400lx
LED Lamp	24 W
Power Consumption	400 W + 370 W (Pump)
Power Supply	220V, 50/60 Hz
Dimensions (W × D × H)	1247 × 800 × 2450 mm
Gross Weight	268 Kg

Made of integrally welded PP material

Resistant to strong acid, alkali and strong corrosion

Solid core physical and chemical board, PP board, ceramic board and other countertop materials are optional

The inside of the detector is equipped with a spray system, which can neutralize the acid gas in the exhaust gas and then discharge it

The control panel can control the lighting system, circuit system, and air volume adjustment system

PP Spray Fume Hoods are used in laboratories to ensure that high concentrations of perchloric acid residues do not accumulate in the fume hood, thereby preventing chemical reactions such as combustion, explosion or a lot of heat.