CO2 Incubator LBN-CO131 operates in a forced convection mode with an 80-litre chamber capacity and a temperature range of 5 to 55°C. It has a 6-chamber surface heating system and the glass door is heated to prevent condensation. Throughout the process, a precise CO2 infrared sensor with high stability ensures maximum reliability and measurement accuracy. The inner glass door is sealed, allowing you to inspect samples without disrupting chamber conditions.
Convection Mode | Forced Convection |
Capacity | 80 L |
Temperature Range | RT+5℃ - 55℃ |
Temperature Accuracy | 0.1 |
Temperature Fluctuation | ±0.5 |
Temperature Uniformity | ±0.8℃ |
CO2 Range | 0 - 20% |
CO2 Sensor Uniformity | IR sensor (±0.1%) |
CO2 Recovery Without Overshoot | ≤2 minutes |
Temperature Recovery Without Overshoot | ≤8 minutes |
Humidification Method | Humidity Pan>95%(with temperature display) |
Ambient Temperature | 10 - 30℃ |
Humidity | <70% |
Insulation Material | environmental protection type material |
Interior Material | SUS304 stainless steel |
No of Shelves | 2 |
Power | 500 W |
Supply Voltage | Single phase AC220V/50Hz |
Internal Dimension (H × W × D) | 500×400×400 mm |
External Dimension (H × W × D) | 755×550×547 mm |
Packing Dimension (H × W × D) | 880×630×635 mm |
Net Weight | 35 Kg |
Easy to clean and significantly reduced risk of contamination
Zero vibration obviates the possibility of cell edging
Reduces the risk of sample evaporation and desiccation by minimizing water loss due to evaporation
Equipped with UV sterilization lamp, effectively prevent the cultivation of cross-contamination
Forced convection of air circulation system to ensure the shortest of temperature recovery after door
Air circulation system to ensure the continuous stability of the temperature of the working chamber
Set temperature is reached, given the perfect environment for sample roasting/culture
CO2 inlet valve with a filter device to ensure cleanliness of the cavity gas
Adaptive PID controller precisely control the temperature and humidity, prevent temperature soaring
Remote-controlled operation, with programmable ALLSENS TM software
Vertical cabinet classic design of structural, electrical components located in the upper cabinet to facilitate maintenance
Intuitive user interface, integrated, dot-matrix LCD display design
PT100 sensor, short response time and low self-heating temperature
Multiple over-temperature protection, audible and visual alarm
anti-pressure protection device in the door frame to avoid debris damage
CO2 Incubators are used in cell culture, microbiology, pathology, life sciences etc.
Download Catalog for CO2 Incubator LBN-CO131
DownloadConvection Mode : Forced Convection
Capacity : 160 L
Temperature Range : RT+5℃ - 55℃
Temperature Accuracy : 0.1
Convection Mode : Forced Convection
Capacity : 80 L
Temperature Range : RT+5℃ - 60℃
Temperature Accuracy : 0.1
Convection Mode : Forced Convection
Capacity : 160 L
Temperature Range : RT+5℃ - 60℃
Temperature Accuracy : 0.1
Cabin Volume : 185 L
Temperature Control Range : Ambient +5°C ~ 60°C
Working Environment Temperature : 5°C ~ 40°C
Sterilization : 140°C hot air sterilization
Cabin Volume : 248 L
Temperature Control Range : Ambient +5°C ~ 60°C
Working Environment Temperature : 5°C ~ 40°C
Sterilization : 140°C hot air sterilization
Temperature Range : RT+5 to 80°C
Temperature Accuracy : ±0.5°C
Ambient Temperature : 5 to 35°C
Shelves : 2 Piece
Chamber Volume : 35 L
Temperature Range : RT+5 to 65℃
Display resolution : 0.1℃
Ambient Temperature : +5℃ to30℃
Temperature Range : RT+5 to 60 °C
Capacity : 170 L
Shaking Speed : 40 to 300 rpm
Temperature Accuracy : ± 0.1 °C
Temperature Range : 4 to 60 °C
Capacity : 280 L
Shaking Speed : 40 to 300 rpm
Temperature Accuracy : ± 0.1 °C
Temperature Range : 4 to 60 °C
Capacity : 582 L
Shaking Speed : 40 to 300 rpm
Temperature Accuracy : ± 0.1 °C
Temperature Range : RT+5 to 60 °C
Capacity : 280 L
Shaking Speed : 40 to 300 rpm
Temperature Accuracy : ± 0.1 °C
Temperature Range : 4 to 60 °C
Capacity : 170 L
Shaking Speed : 40 to 300 rpm
Temperature Accuracy : ± 0.1 °C
Operating Temperature : 4 to 60 ℃ (Refrigeration type)
Temperature Control Precision : ±0.1 ℃
Rotation Frequency : 20 to 300 rpm
Amplitude : Φ26 mm
Operating Temperature : Room temperature +5 to 60 ℃
Temperature Control Precision : ±0.1 ℃
Rotation Frequency : 20 to 300 rpm
Amplitude : Φ26 mm
Operating Temperature : Room temperature +5 to 60 ℃
Temperature Control Precision : ±0.1 ℃
Rotation Frequency : 20 to 300 rpm
Amplitude : Φ26 mm
Capacity : 138 L
Temperature Range : RT +5 to 66 ℃
Temperature Fluctuation : 0.5 ℃
Temperature Uniformity : ±1 ℃
Capacity : 43 L
Temperature Range : RT +5 to 66 ℃
Temperature Fluctuation : 0.5 ℃
Temperature Uniformity : ±1 ℃
Capacity : 252 L
Temperature Range : RT +5 to 66 ℃
Temperature Fluctuation : 0.5 ℃
Temperature Uniformity : ±1 ℃
Capacity : 81 L
Temperature Range : RT +5 to 66 ℃
Temperature Fluctuation : 0.5 ℃
Temperature Uniformity : ±1 ℃
Labnic Biochemical Incubator operates within a temperature range of 5°C to 60°C, suitable for various applications. They support sensitive cultures effectively with consistent temperature distribution and humidity control. These adjustable airflow systems allow for precise control over environmental conditions. Their alert system notifies users of deviations from set parameters, ensuring sample integrity. Our Biochemical Incubator is a reliable choice for research and quality assurance.
Capacity : 186 L
Temperature Range : 5°C to 60°C
Temperature Accuracy : ±1℃
Temperature Fluctuation : ±1℃